Kingston 8GB 3200MHz DDR4 Non-ECC CL22 SODIMM 1Rx8

KVR32S22S8/8 8GB 1Rx8 1G x 64-Bit PC4-3200 CL22 260-Pin SODIMM DESCRIPTION This document describes ValueRAM's KVR32S22S8/8 is a 1G x 64-bit (8GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM), 1Rx8, non-ECC, memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22-22-22 at 1.2V. This 260-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows: FEATURES • Power Supply: VDD = 1.2V Typical • VDDQ = 1.2V Typical • VPP = 2.5V Typical • VDDSPD = 2.2V to 3.6V • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals • Low-power auto self refresh (LPASR) • Data bus inversion (DBI) for data bus • On-die VREFDQ generation and calibration • Single-rank • On-board I2 serial presence-detect (SPD) EEPROM • 16 internal banks; 4 groups of 4 banks each • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS) • Selectable BC4 or BL8 on-the-fly (OTF) • Fly-by topology • Terminated control command and address bus • PCB: Height 1.18” (30.00mm) • RoHS Compliant and Halogen-Free SPECIFICATIONS CL(IDD) - 22 cycles Row Cycle Time (tRCmin) - 45.75ns(min.) Refresh to Active/Refresh Command Time (tRFCmin) - 350ns(min.) Row Active Time (tRASmin) - 32ns(min.) UL Rating - 94 V - 0 Operating Temperature - 0o C to +85o C Storage Temperature - -55o C to +100o C